Introduction to Sealing the Back of Embroidery
Embroidery is a beautiful art form that has been around for centuries. It is a timeless craft that is often used to decorate clothing, accessories and other items. Embroidery is a great way to add a personal touch and individual flair to any item. When creating an embroidered item, it is important to finish the piece correctly by sealing the back of the embroidery. Sealing the back of the embroidery helps to protect the fabric from wear and tear, as well as from dust and dirt. It also helps to keep the design from becoming distorted over time. With the right supplies and some patience, sealing the back of embroidery is a relatively simple task.
Supplies Needed to Seal Embroidery
In order to seal the back of embroidery, there are a few supplies that are needed. First, you will need a piece of iron-on interfacing. This is a type of fabric that is used to add strength and stability to a fabric. It can be found at most fabric stores or online. You will also need an iron and ironing board. Finally, you will need either a piece of fabric or an iron-on backing. An iron-on backing is a piece of fabric that is designed to be fused onto the back of the embroidery with an iron. It adds an extra layer of protection to the fabric.
Steps to Seal the Back of Embroidery
Once you have all of your supplies, it is time to begin sealing the back of the embroidery. Start by laying the embroidery piece on the ironing board. Place the iron-on interfacing underneath the embroidery. If you are using an iron-on backing, place it on top of the embroidery. If you are using a plain piece of fabric, place it on top of the interfacing. Make sure that all of the edges of the fabric pieces are even and aligned. Set your iron to the proper temperature for the fabric that you are using.
Once the iron is ready, press it down onto the fabrics. Move the iron back and forth in a circular motion. Make sure to press it down firmly so that the fabric pieces can fuse together. Keep the iron on the fabric for approximately 10-15 seconds. Once the fabric pieces have fused together, remove the iron and let the fabric cool down. Once the fabric has cooled, check to make sure that the pieces have fused together properly.
If the pieces have not fused together properly, you can repeat the process until they are fused together completely. Once the fabric pieces have been fused together, you can trim off any excess fabric. This will help to give the back of the embroidery a neat and tidy look. Trimming the fabric will also help to give the piece a professional finish.
Additional Tips for Sealing the Back of Embroidery
When sealing the back of embroidery, it is important to be careful not to iron the embroidered design. Doing so could cause the design to become distorted or even damaged. If you are using an iron-on backing, make sure to use a pressing cloth to protect the embroidery design. Also, be sure not to use a steam setting on the iron when fusing the fabric pieces together. Too much steam could cause the fabric pieces to become damp and cause the interfacing to become gummy.
Conclusion
Sealing the back of embroidery is an important step in finishing an embroidery project. With the right supplies and a bit of patience, it is a relatively simple task. Following the steps outlined above will ensure that your embroidery project looks professional and lasts for years to come. With a little practice, you will be able to create beautiful embroidered items that you can enjoy for years to come!
